Complex lifting project? Our Megalift Jacking Systems are the perfect solution for projects where traditional lifting solutions cannot be used.

When it comes to moving heavy machinery or relocating part of a plant, traditional lifting solutions can often fall short due to confined working spaces or restricted floor loadings.

When access is difficult, a lifting method is required to adapt to the problem. The perfect solution is Ainscough Industrial’s range of Megalift Jacking Systems, which can act with versatility to engage with the machinery adjacent to, underneath, around or over the load.

With specialist hydraulic gantry systems, which allow safe load-raising, lowering, turning, tilting and traversing, without dismantling roofs or steelwork frames, Ainscough’s Megalift Jacking Systems provide cost effective, innovative solutions for the movement and lifting of machinery. With almost an infinite range of configurations, our Megalift Jacking Systems can be used to solve even the most unusual heavy lifting problems.

Our Megalift JS systems all have hydraulic rams, with the JS450 & JS130 having safety cam lock offs. The JS40, JS100, JS400 A&B and JS1000 all have non return valves to ensure complete stability and safety whilst lifting a load.

In addition the Megalift JS1000, JS400 A&B and JS 100 systems can be run on either diesel or gas, with the JS450 & JS130 able to run on gas only.

We have used our Megalift Jacking Systems on a range of projects, most recently we used our systems to complete the lift of a 10 tonne dryer for client based in North Wales. You can read more about this project here.

Our Megalift jacking systems can lift up to 1000 tonnes, so there really is no job too small or large for our Megalift systems.

If you require further information on our range of Megalift Jacking Systems please contact our Heavy Lifting Engineering Team today.